Front Seat Heater for Volkswagen Polo

Description

Purpose:

The "Volkswagen Polo" installation kit is a single-mode, built-in seat heater designed for installation under the upholstery of the front standard factory seats of the Volkswagen Polo.

The primary purpose of the heater is to increase vehicle comfort by heating the seat cushion during the cold season.

Kit Contents:

The seat heater kit includes:

cushion element,
backrest element,
main power harness for connection to the vehicle's on-board electrical system with alternative (non-factory) compact control buttons.

Description and Design Features:

The heater is manufactured in accordance with the technical requirements of automakers: in terms of power, heating temperature, electrical safety, and component materials.

Every product undergoes 100% inspection for compliance with technical parameters (circuit resistance, current consumption, and thermal relay cycling).

A resistive stranded wire consisting of twisted conductors individually coated with electrical insulating varnish is used as the heating core of the heater.

The cushion and backrest elements operate simultaneously in a series connection circuit from a 12 V power supply.

The heater design includes a thermal relay to protect against overheating and maintain the set temperature.

The heaters are secured to the seat foam using double-sided adhesive tape applied to the elements.

A universal power harness with an alternative single-mode control button is used to connect the heater to the main circuit; the button has light indicators: a backlight for the seat heating symbol and an ON mode indicator.

The control button is intended to switch the heater on/off and is installed in pre-cut holes in a place convenient for the user: on the seat, armrest, console, or dashboard.

The main power harness can be adjusted in length by the installer without disrupting the connection diagram.

Note:

These elements, cushion paired with backrest, can be used instead of the standard heaters of the Volkswagen Polo; they may also be connected to the standard heating wiring, subject to the connection diagram of the supplied elements.

Not permitted:

to alter the supplied heater configuration, as design changes are possible,
to use the "cushion" or "backrest" elements separately to replace standard heaters,
to disrupt the element connection diagram,
to puncture the heated seat with cutting or piercing objects,
to leave the product switched on unattended.

Section